.png)
LC-3DPrint Box
Revolutionary UV Post-Curing
The LC-3DPrint Box is a revolutionary UV light box, suitable for post-curing 3D printing materials. The new LC-3DPrint Box is equipped with 12 UV light bulbs strategically placed inside the box. This ensures that a product is illuminated from all sides, which results in a quick and uniform curing cycle. The spacious interior (ø 26 cm, H 19,5 cm) allows you to easily cure multiple products at once. In addition, the box has enough space to place an articulator inside. If necessary, the UV light bulbs can be changed easily.
Obtain excellent material properties
The new LC-3DPrint Box allows you to post-cure NextDent® dental 3D printing materials. Post-curing is required in order to obtain the final material properties. After the printing process the printed material is not yet fully cured and should be treated. First, the material needs to be cleaned in an alcohol bath followed by the post-curing cycle.
Post-curing is an UV light treatment to ensure that NextDent® materials obtain full polymer conversion, through this the residual monomer is reduced to a minimum and the highest mechanical properties are obtained. This procedure is a necessary step to produce a biocompatible end-product. Always follow the instructions for use relevant to the corresponding material.
LC-3DPrint Box Benefits
-
High load capacity (LxB 26 cm , H19,5 cm)
-
Full light spectrum (300-550 nm)
-
Short polymerization times
-
Controlled temperature for optimal curing
-
Noiseless
-
Objects are illuminated from all sides
-
New post-process method (without additional nitrogen)
-
Freedom to set individual exposure times
-
One Unit for all countries
LC-3DPrint Box Tech Specs
Rated voltage: AC110-240V 50/60Hz
Power consumption: Max. 264W
Fuse: AC250V T5.0A
Dimensions: W400 X D400 X H380 mm
Weight: 22 Kg
LC-3DMixer
Stirring device for optimum consistency
The LC-3DMixer is a roller/tilting stirring device for mixing 3D printing materials before pouring in the Resin Tray of the printer. Print resins must be mixed well. Only handshaking is insufficient for highly filled and colored materials. The LC-3DMixer should be used to thoroughly mix the material. When mixed insufficiently color deviation and print failures may occur. The NextDent LC-3DMixer keeps your NextDent 3D materials ready for use at any time at an optimum consistency. Always follow the instructions for use relevant to the corresponding material.
Obtain excellent material properties
The new LC-3DPrint Box allows you to post-cure NextDent® dental 3D printing materials. Post-curing is required in order to obtain the final material properties. After the printing process the printed material is not yet fully cured and should be treated. First, the material needs to be cleaned in an alcohol bath followed by the post-curing cycle.
Post-curing is an UV light treatment to ensure that NextDent® materials obtain full polymer conversion, through this the residual monomer is reduced to a minimum and the highest mechanical properties are obtained. This procedure is a necessary step to produce a biocompatible end-product. Always follow the instructions for use relevant to the corresponding material.
LC-3DMixer Benefits
-
Stirring and tilting motion
-
Optimum consistency results
-
Keep materials ready for use
LC-3DMixer Tech Specs
Rated voltage: AC110-240V 50/60Hz
Power consumption: Max. 10W
Fuse: AC250V T2.0A
Dimensions: W 410 X D 270 X H 100 mm
Weight: 4 Kg
.jpg)